 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC to 65 GHz HV Coaxial Connector Plug Terminations HV-TM Series sOverview Low V.S.W.R. in the extremely high frequency band and lightweight, supporting the next generation of even higher signal speeds. A suspended substrate line is used to achieve the extremely high bandwidth and our unique design of the interior components removes coupling stress, while maintaining high reliability. sFeatures 1. Low V.S.W.R. 1.15 (Typical DC to 50 GHz) 1.35 (Typical 50 to 65 GHz) sApplications * Optical transmission devices * Network analyzers * BERTS (Bit Error Ratio Testing Systems) * FWA (Fixed Wireless Access) and for measurement purposes in other applications requiring frequencies of up to 65 GHz. 2. Space-saving design Overall dimensions of only 9 mm dia. x 18.3 mm long 3. Lightweight Total weight of only 5.5 g. 4. Usable over an extremely wide bandwidth Usable over an extremely wide bandwidth of frequencies: DC to 65 GHz. 5. Mating compatibility Will mate with corresponding V ConnectorTM. (Note) 6. Environmental considerations Soldering compounds are lead-free. High Frequency Characteristics (Typical) 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0 V.S.W.R. 10 20 30 40 50 60 65 FREQUENCY(GHz) Note: V Connectors is a registered trademark of Anritsu Corporation. 2004.7 1 sProduct Specifications Frequency range Characteristic impedance Rating Power V.S.W.R. DC to 65GHz 50 ohms 0.5W (At 65c) 1.3 max. (DC to 50GHz) 1.4 max. (50 to 65GHz) Operating relative humidity 90% max. Operating temperature range -10c to +65c Item Specification Conditions 1.Direct current resistance 2.Vibration 3.Shock 50 ohms 4% max. No damage, cracks, or parts dislocation. No damage, cracks, or parts dislocation. No damage, cracks, or parts dislocation. No damage, cracks, or parts dislocation. No damage, cracks, or parts dislocation. No corrosion 1V DC Frequency 10 to 55 Hz, single amplitude of 1.5mm, 3 axis, duration of 2 hours. Acceleration of 490m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis. Temperature: -55c/15c to 25c/125c/15c to 25c Duration (minutes): 30/2 to 3/30/2 to 3 100 cycles 48 hours at 125c 48 hours at -55c 5% salt water solution, 48 hours at 35c 4.Temperature cycle 5.High temperature exposure 6.Low temperature exposure 7.Corrosion resistance sMaterials and Finishes Components Shell Insulator Male contact Coupling Attenuation element Material Stainless steel PTFE (Polytetrafluoroethylene) Brass Stainless steel Metal film Finish Passivated --------------Gold plated Passivated --------------- sOrdering information HV - TM P 1 2 3 1 Series name 2 TM 3 Connector type : HV Series : Non-reflective terminator P:Plug sPlug Type Terminator M7x0.75-6h O8.5 Part number HV-TMP CL No. CL 353-0146-6 8HEX 18.3 BPrecautions The center pin contact has the diameter of 0.511 mm. Exercise due care when handling the terminator. When mating the terminator with the corresponding connector rotate the hex part only. Do not apply axial loads to the center contact or the terminator body. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 2 |
Price & Availability of HV-TMP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |